Conector

RE-KKB 16-1W
Coupling devices up to 16A
This socket is designed for devices with high current draw to 16A.
By the transverse contacts the connector series is not combatible to the standard 10A IEC plugs.

Cross-section: max. 3x2mm ²

General
Color - Black
Type - eitungskupplung

Electrical values
Approval: VDE, UL
Maximum load: 250VAC / 16A (IEC) / 20A (UL)

Mass
Cable diameter Ø: 10 mm

RE-KM 01.1205
Compact Power entry element

With connector, fuse holder and 1-pole power switch turns as well as EMC shielding.
Snap-in mounting of the front of the unit.
All single elements are already wired. Fuse holder from the outside of the unit accessible.

Attention! Fuse holder with separate order.

General
Type: Plug
Color: black

Execution
Model with switch
Snap-in mounting

Mass
Panel cut-out 47.8 x 28.8 mm

RE-KM 01SH-1
Fuseholders

Combination of elements suitable for one-way and two-way protection

General
Type: Plug
Color: black

Execution
Version for 2 fuses

RE-KM 01.1205
Compact Power entry element

With connector, fuse holder and 1-pole power switch turns as well as EMC shielding.
Snap-in mounting of the front of the unit.
All single elements are already wired. Fuse holder from the outside of the unit accessible.

Attention! Fuse holder with separate order.

General
Type: Plug
Color: black

Execution
Model with switch
Snap-in mounting
with net filter

Mass
Panel cut-out 47.8 x 28.8 mm

RE-KES 16-5,
Entry Module to 16A, Screw 1.5 mm

This entry module is designed for devices with high current draw to 16A. By the transverse contacts is the number of non combatible plug to the standard 10A IEC plugs

General
Type: Device connector
Color: black

Execution
Model with switch
Fixing: Screw
Connection: 6.3 mm Faston

Mass
Front panel cutout: 46.5 x 32.5 mm
Height - 36 mm
Width - 67 mm
Depth - 28.3 mm

Electrical values
Maximum load: 250VAC / 16A (IEC) / 20A (UL)
Approval: VDE, UL

RE-KES 16-1,
coupling devices up to 16A

This connector is designed for devices with high current draw to 16A. By the transverse contacts the connector series is not combatible to the standard 10A IEC plugs.

Cross-section: max. 3x2mm ²

Execution
Attachment; Screw
Connector, 6.3 mm Faston

Mass
Front panel cutout: 32.6 x 24.5 mm
Height - 42 mm
Width-53 mm
Depth 28.3 mm

Electrical values
Maximum load: 250VAC / 16A (IEC) / 20A (UL)
Approval: VDE, UL

RE-S GSF1
IPlug Protection class I, "snap in"

Installation on board the "snap in" fixing
For PCB mounting in the rear housing by plug or sandwich mounting ambient temperature Ta -25 to +70 ° C
resistance 5MOhm
housing made of heat resistant plastic UL 94-V0

General
Type: Plug
Color: black

Execution
2-Pin version. Fuseholder for 5x20mm fuses
Mounting: Snap-In Front / PCB mounting
Connection: 4,8 mm Faston
Protection: Class I

Mass
Panel cutout: 30.3 x 22.3 mm

Electrical values
Maximum load: 50VAC / 10A

S KEB1
IEC sockets with max. pin temperature 70 ° C

General
color: black
type: connector

Execution
Connection: 6,3 mm Faston
Fixing: Screw
Protection: Class I

Electrical values
Approval: VDE, UL, SEV, SEMKO, CSA
Maximum load: 250VAC / 10A

Mass
Panel cutout: 32.5 x 24.8 mm

RE-GRF 2,
Plug with EMI shielding dense

with EMC shielding using dense rangy stainless steel blades. Cost-saving and safe installation with new LOCK & SHIELD (TM) process.

Leakage current: <0.5 mA

Execution
Design: Shielded connector
Panel cutout: 30.5 x 20.8 mm
Color: Black

Maximum load 250VAC / 10A
Approval: VDE, UL, SEV, SEMKO, CSA